Sanyo Split Air Conditioner Troubleshooting
If your air conditioner does not work properly, first check the following points before requesting service.If it still does not work properly, contact your dealer or service center.
1-Trouble
Air conditioner does not run at all.
Possible Cause
1. Power failure
2. Leakage breaker tripped.
3. Line voltage is too low.
4. ON/OFF operation button is OFF.
5. Batteries in remote control unit have run down.
Remedy
1. Restore power
2. Contact service center
3. Consult with electrician or dealer.
4. Press the button again.
5. Replace batteries.
2-Trouble
Compressor runs but soon stops
1. Obstruction in front of condenser coil.
Remedy
1. Remove obstruction.
3-Trouble
Poor cooling performance.
Possible Cause
1. Dirty or clogged air filter.
2. Heat source (cooker, heater, or electrical appliance) or many people in room.
3. Doors and/or windows are open.
4. Obstacle near air intake or air discharge port.
5. Thermostat is set too high.
Remedy
1. Clean the air filter to improve the air flow.
2. Eliminate heat source if possible.
3. Shut them to keep the heat out.
4. Remove it to ensure good air flow.
5. Set the temperature lower.
