Dometic Thermostat Error Codes

Dometic Thermostat Error Codes

When the system determines that one of the faults listed below has occurred an error code will be displayed in the LCD.

System Reset Procedure

When your unit was installed the appropriate dip switches on the electronic control
board were turned on to match your system configuration. Any time these settings
are changed, a system reset will need to be done before the CCC 2 thermostat will
recognize the updated selection. To do a system reset:
• Make sure the CCC 2 thermostat is in the OFF mode.
• Simultaneously press the MODE and ZONE buttons. The LCD will display
“IniT” and all available zones.
• Release the MODE and ZONE buttons.
• Press the ON/OFF button to exit system set up.

Dometic thermostat error codes-E1-E2-E3-E4-E5-E6-E7-E8-E9