Danby Portable Air Conditioner
Error Codes
E1– Error with the coils temperature sensor.
E2-Error with the indoor temperature sensor.
E4-Frost protection: the temperature of the coil is too low and the A/C shuts down to prevent excess frost build-up. When the temperature increases to 8°C (46.4°F), the protective setting is released and the previous setting is applied.
Danby Portable Air Conditioner Troubleshooting
WARNING
ADVERTISEMENT
Be sure the electrical service is adequate for the model you
have chosen. This information can be found on the serial plate,
which is located on the side of the cabinet and behind the grille.• Be sure the air conditioner is properly grounded. To minimize shock and fire hazards, proper grounding is important. The power cord is equipped with a three-prong grounding plug for protection against shock hazards.
• Your air conditioner must be used in a properly grounded wall receptacle. If the wall receptacle you intend to use is not adequately grounded or protected by a time delay fuse or circuit breaker, have a qualified electrician install the proper receptacle.
• Ensure the receptacle is accessible after the unit installation.
