Electrolux AC Error Codes
Error Codes
|
Problem
|
EE
|
Loading EEPROM Malfunction
|
E2
|
Anti-Freeze Protection
|
E3
|
Refrigeration System Blocked/Gas Leak
|
E4
|
Compressor High Temp Protection
|
E5
|
AC-Over Current Protection
|
E6
|
Communications Fault
|
E8
|
Anti-High Temperature Protection
|
F1
|
Sensor, Room Temperature (Indoor)
|
F2
|
Sensor, Tube Temperature (Indoor)
|
F3
|
Sensor, Ambient (Outdoor)
|
F4
|
Sensor, Coil (Outdoor)
|
F5
|
Sensor, Compressor Discharge (Outdoor)
|
F6
|
Anti-High Temperature Protection
|
FH
|
Anti-Freeze Limit, Frequency Drop
|
H1
|
Defrosting. It is normal. The unit is in defrosting mode
and heating will recommence soon.
|
H3
|
Compressor Overload Protection
|
H5
|
IPM Protection
|
H6
|
Fan Stall, Indoor Unit
|
HC
|
PFC Protection
|
Outdoor Error CodeMalfunction
Code Table of Outdoor Unit
E2: Freeze Protection
H5: IPM protection
E5: Overcurrent
protection
EE: EEPROM reading and
writing malfunction
PL: Low voltage
protection
PH: High voltage
protection
HC: PFC overcurrent
protection
LP: Mismatching of
models of indoor and outdoor units
F3: Malfunction of
outdoor ambient temperature sensor
F4: Malfunction of
outdoor pipe temperature sensor
F5: Malfunction of
outdoor discharge temperature sensor
E6: Communication
malfunction
E3: Low pressure
protection(refrigerant leak)
U7: Abnormality of
4-way valve
E8: Over-load
protection
E4: Discharge
temperature protection
H3: Overload protection
L9: Over power
protection
Troubleshooting
The air conditioner is
not user serviceable. Incorrect repair may cause electric shock or fire,
so please contact an authorised service center for professional
repair. The following checks prior to contact may save you time and
money.
Problem: The
unit does not operate
Cause: The unit does
not work properly when you switch on again and again .This is to protect the
unit. You should wait about 3 minutes.
Problem: Bad
Smell Emitted.
Cause:
- Some
odours may be emitted from the indoor unit. This is the result of room
smells (such as furniture,tobacco,etc.) which have been taken into the air
conditioner.
- Consult authorised service centre for cleaning
if the odours persist.
Problem: “Water
flowing” noise
Cause: The swishing
noise like water flowing is the refrigerant flowing inside the unit.
Problem: Mist
is emitted in COOL mode
Cause: During cooling
operation, a thin mist may be seen emitted from the indoor unit due to high
room temperature and humidity. After a period of time, the mist will disappear
as the decrease of room temperature and humidity decreases.
Problem: Cracking
noise
Cause: This is the
sound of friction caused by expansion and/or contraction of panel or other
parts due to the change of temperature.
